Cadence Flash F200-2 Guía para resolver problemas descargar pdf (Pagina 276)

100

101

276 VoIP

VGMC> UKLossPlanClr

value =0=0x0

VGMC>

IP client loss plan set to default values

UKLossPlanSet

Syntax:

UKLossPlanSet

Increase the handset and headset gain settings in the IP Phone by 5 dB

to raise the volume levels beyond those specified by TIA-810A/TIA-912 to

be closer to those used for the digital phones in the United Kingdom. No

parameters are needed, as this command increases the gain by a fixed

amount.

Run this command on the node Leader card while it is the node master, to

ensure that the data propagates correctly to all cards in the node. When

you install a new leader card on a node with modified levels, always enter

the loss plan command on the CLI even if you previously entered the

command on the CLI of another card.

After you enter this command, the gain adjustment is downloaded to

all registered telephones. When phones register, they are downloaded

the new gain values. The gain adjustment is also saved to a disk file

(/c:/config/loss.ini) so the adjusted gains are retained when the card

reboots.

When a node has a modified loss plan (that is, either this command or

lossPlanSet was used), a new card added to the node is updated with

the modified loss plan 30 seconds after it boots up. Prior to that being

received, calls made by IP Phones registered to the new card have the

default loss plan levels.

Note: Systems with this command activated may experience increased

occurrence of echo and other audio issues related to the increased

volume.

The following example shows command output.

VGMC> UKLossPlanSet

value =0=0x0

VGMC>

IP client loss plan adjusted to UK levels

umsKernelShowJobs

Syntax:

umsKernelShowJobs "jobType"

Nortel Communication Server 1000

Troubleshooting Guide for Distributors

NN43001-730 02.02 31 December 2009

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 503 504

Comentarios a estos manuales

Sin comentarios

Cadence Flash F200-2 Guía para resolver problemas Pagina 276

Comentarios a estos manuales

Relacionado con productos y manuales para Amplificadores de audio de coche Cadence Flash F200-2