Cadence Flash F200-2 Guía para resolver problemas descargar pdf (Pagina 191)

VoIP command reference 191

HeadsetSLR 11 -5 6

HandsfreeRLR 13 0 13

HandsfreeSLR 16 0 16

lossPlanSet

Syntax:

lossPlanSet "transducer", rlrOffset, slrOffset

Change the gain settings on the IP Phone from the volume levels specified

by the TIA-810A and TIA-912. The parameter transducer specifies the

transducer name that requires a gain adjustment: handset, headset, or

handsfree. The parameter rlrOffset specifies the amount of receive-level

adjustment (the level for the IP Phone user), while the parameter slrOffset

specifies the amount of transmit level adjustment (the level for the far-end

user). Values for both are in the range –8 to 8 (in dB). Negative values (–8

to –1) increase the volume (gain).

Enter the command once for each transducer level requiring adjustment.

Adjustments are not cumulative; the last one entered for a particular

transducer replaces prior offset for the transducer.

Enter this command on the node Leader card while it is the node master to

ensure that the data ipropagates correctly to all cards in the node. When

you install a new leader card on a node with modified levels, always enter

the loss plan command on the CLI even if the command was previously

entered on the CLI on another card.

After you enter this command, the gain adjustment is downloaded to

all registered telephones. When phones register, they are downloaded

the new gain values. The gain adjustment is also saved to a disk file

(/c:/config/loss.ini) so the adjusted gains are retained when the card

reboots.

When a node has a modified loss plan (that is, when you use this

command or UKLossPlanSet), a new card added to the node is updated

with the modified loss plan 30 seconds after it boots. Prior to that being

received, calls made by IP Phones registered to the new card have the

default loss plan levels.

Note: If the gain of the IP Phones is raised from the default levels,

those phones can experience increased occurrence of echo and other

audio issues related to the increased volume.

VGMC> lossPlanSet "headset",0,-3

value =6=0x6

VGMC>

Headset loss changed to RLR = 0 SLR = 8

Nortel Communication Server 1000

Troubleshooting Guide for Distributors

NN43001-730 02.02 31 December 2009

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 503 504

Comentarios a estos manuales

Sin comentarios

Cadence Flash F200-2 Guía para resolver problemas Pagina 191

Comentarios a estos manuales

Relacionado con productos y manuales para Amplificadores de audio de coche Cadence Flash F200-2