Cadence Flash F200-2 Guía para resolver problemas descargar pdf (Pagina 263)

100

101

VoIP command reference 263

len 16

FEB 23 12:36:49 tTPS: Info send msg from 192.168.1.140 to

192.168.1.255

tsm_set_rx_gain chNum, gain_value

Syntax:

tsm_set_rx_gain chNum, gain_value

Assign a DSP channel receive gain (gain for audio in from the IP Phone)

for the active call. This command applies only to the VGMCs.

After the call is dropped, the gain adjustment is reset. This command is

intended for temporary problem debugging only, not for actual loss plan

changes.

The following table describes the command parameters.

Table 63

Command parameters

Parameter Value Description

chNum

–

Channel number.

gain_value

–14 to 14

DSP gain, in the range of –14 to +14 dB.

Positive values are louder.

-> tsm_set_rx_gain 0,6

value =0=0x0

tsm_set_tx_gain chNum, txGain, txInGain

Syntax:

tsm_set_tx_gain chNum, txGain, txInGain

This command sets a DSP channel transmit gain (gain for audio out

towards the IP Phone) for the active call. This command applies only to

the VGMCs.

The following table describes the command parameters.

Table 64

Command parameters

Parameter Value Description

chNum

–

Channel number of the call on the VGMC.

Nortel Communication Server 1000

Troubleshooting Guide for Distributors

NN43001-730 02.02 31 December 2009

1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 503 504

Comentarios a estos manuales

Sin comentarios

Cadence Flash F200-2 Guía para resolver problemas Pagina 263

Comentarios a estos manuales

Relacionado con productos y manuales para Amplificadores de audio de coche Cadence Flash F200-2